User manual – Glass Clock Design #3
rev 3.2
!
Cold War Creations, 2014
12
Set date mode
When the clock is in the set date mode, the current date will be
displayed with the days (2 leftmost digits) blinking. The colons
will both be off.
The clock will automatically compensate for leap year.
If not in the date set mode, see the “Setting the time and date”
section. Before the date can be set, the time must be set. Note: If
only the date needs to be set, enter time set mode, and momentarily
press the red mode button to go through the hours, minutes until
the date mode appears. The time will not change.
To cancel setting the date value at any point, press and hold the red
mode button until the display goes blank. This will cancel setting
the date. When the mode button is released, the clock will go back
to the normal display. The old date value will be used.
5.1.4
Setting the date – month
At this point, the month number (digits selected depend on date
format) will be blinking. Use the function button to change the
month value ('01' = January, '12' = December, etc).
Once the month value is set to the proper value, press the red mode
button momentarily. The clock will then go to the day set mode.
5.1.5
Setting the date – day
At this point, the day number (digits selected depend on date
format) will be blinking. Use the black function button (left side)
to change the day value (01 – 31).
Once the day value is set to the proper value, press the red mode
button momentarily. The clock will then go to the year set mode.
Содержание Glass Nixie Tube Clock #3 IN-14
Страница 1: ...Glass Nixie Tube Clock 3 IN 14 Version User s manual...
Страница 41: ...User manual Glass Clock Design 3 rev 3 2...
