CognitiveTPG A776II, Руководство пользователя

Страница: 15 / 46

10
Chapter 3: Settng up the Printer
A776II Two-Color Thermal/Impact Hybrid Printer: User Guide A776 2UG0001 B 11/2016
Removing and installing a ribbon cassette
Change the impact printer’s ribbon cassette if it is printing lightly or produces marks, lines or other inconsistent
printing on the slip.
CAUTION
Use of other than an approved CognitiveTPG ribbon cassette can void all warranties and cause damage from
jamming and other ribbon problems.
Removing a used ribbon cassette
1. Open the front cover (1) by grasping the cover on
each side near the top and swinging it toward you.
2. Pinch in tabs of the old ribbon cassette (2) and pull
straight upward to remove it.
Installing a new ribbon cassette
1. Open the front cover (1) by grasping the cover on
each side at the bottom and swing up.
2. Unwrap the new ribbon cassette and tighten the
ribbon by turning the knob on the cassette in the
direction of the arrow.
CAUTION
DO NOT remove the transparent mylar shield that
protects the exposed ribbon.
3. Position the ribbon cassette on the carriage, as
shown, making sure the ribbon is not caught on the
print head.
4. Snap the cassette into place (2) and close the cover.
A776 Lift Ribbon.eps
2
1
A776 Replace Ribbon.eps
Knob
2
1
Ribbon Alone.eps