COFFEtek VITRO X3, Техническое руководство

Страница: 22 / 69

COFFE tek LTD
VITRO X3 Issue 1 23/02/17 22
Typically ingredient C
is Coffee
<ING C>
000 (Start)
Time after button pressed that
ingredient C motor starts in tenth of a
second.
<ING C>
014 (Duration)
Time for which ingredient C motor
runs in tenths of a second.
Typically ingredient D
is Espresso or Decaf
<ING D>
000 (Start)
Time after button pressed that
ingredient D motor starts in tenth of a
second.
<ING D>
000 (Duration)
Time for which ingredient D motor
runs in tenths of a second.
<WATER A>
000 (Start)
Time after button pressed that
dispense valve associated with
ingredient A/B mixer system opens.
<WATER A>
000 (Duration)
Time for which A/B dispense valve
opens in tenths of a second.
<WATER D>
000 (Start)
Time after button pressed that
dispense valve associated with
ingredient D mixer system opens.
<WATER D>
030 (Duration)
Time for which D dispense valve
opens in tenths of a second.
<WHIPPER A>
000 (Start) Time after button pressed that A/B
mixer motor begins to run.
< WHIPPER A >
000 (Duration)
Time for which A/B mixer motor runs
in tenths of a second.
<WHIPPER D>
000 (Start)
Time after button pressed that D
mixer motor begins to run.
< WHIPPER D >
008 (Duration)
Time for which D mixer motor runs in
tenths of a second.
HOT WATER
010 (Start) Time after button pressed that hot
water dispense valve opens.
HOT WATER
000 (Duration)
Time for which hot water dispense
valve opens.
FLUSH BOWL A
060 (Start)
At the end of a dispense cycle it is
possible to program a small amount of
water through the large mixing system
to clean it and prevent drips. These
parameters control the timing of this
shot of water.
Note. Only occurs on last cycle of
multi-cycle drinks.
FLUSH BOWL A
010 (Duration)