4) Press the
+
or
-
buttons until
LIFE
(for lamp life) is displayed.
5) Press the
enter
button to confirm your selection. The display will show 0000,
confirming that the lamp life counter is reset.
dirp
This function inverts the movement for horizontal (pan) movements.
1) Press the
menu
button.
2) Press the
+
or
-
button until
dirP
(for pan direction) is displayed.
3) Press the
enter
enter button to confirm your selection. The display will show
cW
(for clockwise).
4) Press the
+
or
-
until
ccW
(for counterclockwise) is displayed.
5) Press the
enter
button after either step 3 or step 4 to confirm your choice of
direction.
dirt
This function inverts the movements for vertical (tilt) movements.
1) Press the
menu
button.
2) Press the
+
or
-
buttons until
dirt
(for tilt direction) is displayed.
3) Press the
enter
button to confirm your selection. The display will show
cW
(for
clockwise).
4) Press the
+
or
-
until
ccW
(for counterclockwise) is displayed.
5) Press the
enter
button after either step 3 or step 4 to confirm your choice of
direction.
oPto
This function allows the sensors which read the instantaneous pan and tilt positons
of the fixture to be switched on or off.
With the sensors activated (
opto ON
) the projector will automatically return to its
correct position in case it is accidentaly moved out of position.
With the sensors inactivated (
opto OFF
) the projector will not return automatically to
its correct position if it is accidentaly moved out of position.
NOTE:
there will be a noticable difference in the projector at startup; with
opto
ON
the reset operation takes but a few seconds; the reset can last up to a minute if
opto oFF
is selcted.
function display
menu
+
-
enter
function display
menu
+
-
enter
function display
menu
+
-
enter
function display
menu
+
-
enter
function display
menu
+
-
enter
function display
menu
+
-
enter
function display
menu
+
-
enter
