8. Signal connection
Control signal is digital and is transmitted via two pair screened ø 0,5mm cable.
Connection is serial, using the XLR 3 or XLR5 male and female sockets set on the rear
part of the
CF 1200 Spot
, labelled
DMX 512
and
DMX 512 standard
(see dia-
gram).
Connection is to international standards:
pin 1= screening 0 volts pin 4= not connected
pin 2= data - pin 5= not connected
pin 3= data +
A connection via 5 Pin XLR 5
Ad altri
CF 1200 Spot
Connect to other
CF 1200 Spot
3
2
1
Controller
Standard
DMX 512
OUT
in
out
in
out
