14. Interchanging
Dichroic filters can be replaced with any colour you require; note that the
dichroic colours on
filter should be sized Ø 45mm, thickness 1 mm , and the glass should be tempered (heat-
the colour wheel
resistant).
Prior to effecting any internal procedure, mains power should be disconnected from
the unit.
replacing a dichroic filter
1) Remove the top of the unit by releasing the two latches
A
and remove the top
B
as shown in the diagram.
2) Locate the interchangeable dichroic colour wheel.
3) Rotate the colour wheel manually until to locate the dichroic you wish to remove.
Attention
Disconnect mains power prior to opening the unit.
