diMM
1) Press the
+
or
-
buttons until
diMM
(for dimmer alignment).
2) Press the
enter
button to confirm your selection. The display will show a numeri-
cal value which corresponds with the factory setting.
3) Press the
+
or
-
buttons until the displayed number corresponds with the correct
closure of all the dimmers of the
CF 1200 Spots
in your installation.
4) Press the
enter
button to confirm your selection.
END
1) Press the
+
or
-
until
END
(for completion of the electronic alignment procedure)
is displayed
2) Press the
enter
button to confirm your selection. The display will revert to its nor-
mal operating mode and the internal memory will record all changes made.
N.B.
: At the termination of the above electronic calibration procedure, if the
END
function is not performed, no memory changes will be effected. This allows the ope-
rator to abort any changes made, in case of operator error.
function display
menu
+
-
enter
function display
menu
+
-
enter
