COBHAM SEA TEL 9711IMA-70, Руководство по установке

Страница: 29 / 178

9711IMA-70 Installation
3-9
6. Cut the bands holding the DAC and BDE Box
(pictured in center). Stage this box where
the Below Decks Equipment is temporarily
located.
7. Cut the bands holding the Air Con Box (if
included). Stage this item in the location
where the Base Frame will be assembled.
8. Remove the plastic covering over the
Pedestal.
Important: It is good practice to secure the pedestal
with lifting harnesses prior to removing the bolts in
the subsequent steps. First, attach 2 lifting straps
under the cross-level beam on the pedestal. Assure
that no cables, on the front or back side of the cross-
level beam, are pinched by the lifting straps.
9. Attach the lifting hook from a crane, or other
suitable lifting apparatus, to the 2 harness
straps. Lift only enough to slightly tension
the lifting straps.
10. If large counter-weight assemblies (which
have been removed from the equipment
frame) are packaged with the pedestal in this
crate, cut the bands (or unbolt) them from
the pallet and stage them in the location
where the Pedestal will be assembled.
11. Remove the 4 bolts securing the wooden
vertical supports from the Pedestal Arm
Assemblies. There will be 2 on the right, and
2 on the left.
EAR Controlled - ECCN EAR99