COBHAM SEA TEL 9711IMA-70, Руководство по установке

Страница: 28 / 178

Installation 9711IMA-70
3-8
20. Apply Loctite 242 to, install and tighten the
eight screws (see red arrows) through the
front of the scalar plate and into the end of
the drop-in feed assembly.
21. Keep the assembled reflector/feed assembly
mounted on the reflector support structure
until you are ready to install it on the
Pedestal.
22. Keep any additional Feed assembly(ies) in
this area with the reflector.
23. Keep the Waveguide box in this area until
you are ready to install the reflector on the
Pedestal.
Note: You will install the reflector later in the
installation instructions.
3.5. Unpacking the Pedestal Crate
The Pedestal crate contains the Pedestal Assembly, Spider, DAC & BDE box, RF units, Wave Guide boxes, Hardware
Kits and the Air Conditioning unit if one is with the shipment. If there are two RF units the Wave Guide and
hardware for each is in separate boxes.
Unpacking the Pedestal Crate:
1. Open the crate, to expose the contents, as
described above.
2. Cut the bands holding the Balance Weight
Box along with the Hardware and
Miscellaneous Box. Stage these items in the
location where the Pedestal will be
assembled.
3. Cut the band holding the Hardware to
assemble Pedestal to Spider. Assure that this
hardware stays with the mounting spider.
4. Cut the remaining restraints and remove the
mounting spider. Stage it with the location
where the base frame will be assembled.
5. Cut the bands holding the RF Box (or boxes
depending on product). Stage these items
in the location where the Pedestal will be
assembled.
EAR Controlled - ECCN EAR99