manualshive.com logo in svg

COBHAM GR740, Руководство пользователя

Пользовательский мануал COBHAM GR740 доступен для загрузки бесплатно на нашем сайте. Этот руководство содержит полезные инструкции по использованию продукта. Не забудьте скачать его с manualshive.com. Узнайте больше о продукте, изучив данное руководство.

Поделиться
Скачать
background image

GR740-UM-DS, Nov 2017, Version 1.7

427

www.cobham.com/gaisler

GR740

Table 559. 

0x20 - SPW2.DMACTRL - DMA control/status, channel 1

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10

9

8

7

6

5

4

3

2

1

0

RESERVED

EP TR

RES

RP TP TL LE SP SA EN NS RD RX AT RA TA PR PS AI RI TI RE TE

0x00

0

0

0x0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0 NR NR NR 0

0

r

wc wc

r

wc wc wc rw rw rw rw rw rw

r

rw wc wc wc wc rw rw rw rw rw

31: 24

RESERVED

23

EEP termination (EP) - Set to 1 when a received packet for the corresponding DMA channel ended with an 
Error End of Packet (EEP) character.

22

Truncated (TR) - Set to 1 when a received packet for the corresponding DMA channel is truncated due to a 
maximum length violation.

21: 20

RESERVED

19

Receive packet IRQ (RP) - This bit is set to 1 when an AMBA interrupt was generated due to the fact that a 
packet was received for the corresponding DMA channel.

18

Transmit packet IRQ (TP) - This bit is set to 1 when an AMBA interrupt was generated due to the fact that a 
packet was transmitted for the corresponding DMA channel.

17

Transmitter enable lock (TL) - This bit is set to 1 if the CTRL.TL bit is set, and the transmitter for the 
corresponding DMA channel is disabled due to a link error (controlled by the DMACTRL.LE bit). 
While this bit is set, it is not possible to re-enable the transmitter (e.g. not possible to set the TE bit to 
1).

16

Link error disable (LE) - Disable transmitter when a link error occurs. No more packets will be trans-
mitted until the transmitter is enabled again.

15

Strip pid (SP) - Remove the pid byte (second byte) of each packet. The address byte (first byte) will also be 
removed when this bit is set independent of the SA bit.

14

Strip addr (SA) - Remove the addr byte (first byte) of each packet.

13

Enable addr (EN) - Enable separate node address for this channel.

12

No spill (NS) - If cleared, packets will be discarded when a packet is arriving and there are no active descrip-
tors. If set, the GRSPW will wait for a descriptor to be activated.

11

Rx descriptors available (RD) - Set to one, to indicate to the GRSPW that there are enabled descriptors in the 
descriptor table. Cleared by the GRSPW when it encounters a disabled descriptor:

10

RX active (RX) - Is set to ‘1’ if a reception to the DMA channel is currently active otherwise it is ‘0’. 

9

Abort TX (AT) - Set to one to abort the currently transmitting packet and disable transmissions. If no trans-
mission is active the only effect is to disable transmissions. Self clearing.

8

RX AHB error (RA) - An error response was detected on the AHB bus while this receive DMA channel was 
accessing the bus. See also the AMBA ERROR propagation description in section 5.10.

7

TX AHB error (TA) - An error response was detected on the AHB bus while this transmit DMA channel was 
accessing the bus.

6

Packet received (PR) - This bit is set each time a packet has been received. never cleared by the SW-node.

5

Packet sent (PS) - This bit is set each time a packet has been sent. Never cleared by the SW-node.

4

AHB error interrupt (AI) - If set, an interrupt will be generated each time an AHB error occurs when this 
DMA channel is accessing the bus.

3

Receive interrupt (RI) - If set, an interrupt will be generated each time a packet has been received. This hap-
pens both if the packet is terminated by an EEP or EOP.

2

Transmit interrupt (TI) - If set, an interrupt will be generated each time a packet is transmitted. The interrupt 
is generated regardless of whether the transmission was successful or not.

1

Receiver enable (RE) - Set to one when packets are allowed to be received to this channel.

0

Transmitter enable (TE) - Write a one to this bit each time new descriptors are activated in the table. Writing 
a one will cause the SW-node to read a new descriptor and try to transmit the packet it points to. This bit is 
automatically cleared when the SW-node encounters a descriptor which is disabled. 

Содержание GR740









































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для GR740

D-Link Express EtherNetwork DFE-670TXD Quick Install Manual preview
Express EtherNetwork DFE-670TXD
Бренд: D-Link Страницы: 4
DAD DSX 26 User Manual preview
DSX 26
Бренд: DAD Страницы: 36
D-Link DUB-1320 Quick Install Manual preview
DUB-1320
Бренд: D-Link Страницы: 2
XESS XStend XS40 User Manual preview
XStend XS40
Бренд: XESS Страницы: 23
Teagle Tomahawk 7100 Operator'S Manual preview
Tomahawk 7100
Бренд: Teagle Страницы: 40
TFortis Teleport-1 Configuration Manual preview
Teleport-1
Бренд: TFortis Страницы: 86
Intel NetStructure ZT 5515 Product Specification preview
NetStructure ZT 5515
Бренд: Intel Страницы: 90
Broadcom Brocade X6-8 Director Hardware Installation Manual preview
Brocade X6-8 Director
Бренд: Broadcom Страницы: 207
ROE EVISON HD101 User Manual preview
EVISON HD101
Бренд: ROE Страницы: 41
AXIOMTEK eBOX532-100-FL Series Quick Installation Manual preview
eBOX532-100-FL Series
Бренд: AXIOMTEK Страницы: 2
Tandy 26-3814 Operation Manual preview
26-3814
Бренд: Tandy Страницы: 24
MEDIATEK MT6252 Design Manual preview
MT6252
Бренд: MEDIATEK Страницы: 166
ZALMAN CNPS7000C Series User Manual preview
CNPS7000C Series
Бренд: ZALMAN Страницы: 8
Eurotech Zypad WL15 Series Quick Start preview
Zypad WL15 Series
Бренд: Eurotech Страницы: 2
Uniflair PCOWeb Instruction Manual preview
PCOWeb
Бренд: Uniflair Страницы: 24
National Instruments SC-2040 User Manual preview
SC-2040
Бренд: National Instruments Страницы: 56
Xenteq SR 200-12 User Manual preview
SR 200-12
Бренд: Xenteq Страницы: 16
Maxtor DiamondMax 8S Specification Sheet preview
DiamondMax 8S
Бренд: Maxtor Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды