Clockaudio TIM-1000, Руководство пользователя

Страница: 39 / 44

V1.4 2019-09 Page 31 of 35
11.9 SRGB (Set RGB State)
Definition The SRGB State command provides a more granular level for setting the
brightness of the Red, Green and Blue LEDs in the LEDs
Syntax SRGB <Space> <PARAM 1> <Space> <PARAM 2> <CR>
PARAM 1 This parameter defines the LED number.
0 = All LEDs
1..15 = Specific LED
PARAM 2 This parameter specifies the intensity level for each RGB colour as a decimal
value of 8 bits i.e. 0 through 255
Example(s) To set RGB values
Ex 1: SRGB 0 255 255 255<CR> ; set Red, Green and Blue LEDs to full intensity
on all LEDs
Ex 2: SRGB 1 128 0 255<CR> ; set Red to 50%, Green to 0% and Blue to 100%
intensity on LED 1
Device
response(s) The following response shall be received from the device
Res 1: ACK SRGB 0 255 255 255<CR>
Res 2: ACK SRGB 1 128 0 255<CR>
11.10 GRGB (Get RGB State)
Definition The GRGB State command retrieves the brightness of the Red, Green and Blue of
either ALL or a selected LED.
Syntax GRGB <Space> <PARAM 1> <CR>
PARAM 1 This parameter defines the LED number.
0 = All LEDs
1..15 = Specific LED
PARAM 2 This parameter is not required. Carriage return shall follow immediately after
Parameter 1.
Example(s) To request RGB status
Ex 1: GTS 0<CR> ; requests RGB status for all LEDs
Ex 2: GTS 2<CR> ; requests RGB status for LED 2 only
Device
response(s) The following response shall be received from the device
Res 1: ACK GRGB 0 CH1 200 167 167 …... CH15 67 95 100<CR>
Res 2: ACK GRGB CH2 128 128 250<CR>