background image

DESCRIPTION 

The ES915SC is a wide-range
miniature condenser microphone
with a cardioid polar pattern and 
an integral mute switch/LED. It 
is designed for quality sound 
reinforcement, professional recording,
television and other demanding
sound pickup applications. The small-
diameter double gooseneck design
permits highly flexible positioning
while maintaining a smooth, well-
contoured appearance. An included
snap-on foam windscreen effectively
reduces wind noise and “popping.”

The ES915SC is equipped with
UniGuard

®

RFI-shielding technology,

which offers outstanding rejection of
radio frequency interference (RFI).
The microphone is RoHS compliant
– free from all substances specified
in the EU directive on hazardous
substances.

The microphone's cardioid polar
pattern provides a 120° angle of
acceptance. Additional interchange-

able elements with omnidirectional (360°), hypercardioid (100°) and
MicroLine

®

(90°) pickup patterns are available.

The integral power module can be powered from any external 11V to
52V DC phantom power supply. A recessed switch in the power module
permits choice of flat response or low-frequency roll-off (via integral 80
Hz high-pass UniSteep

®

filter) to help control undesired ambient noise.

A mute switch in the base lights when the mic is “on.” The switch is
designed to operate quietly without any mechanical noise.

The microphone is enclosed in a rugged housing with a low-reflectance
black finish. It features an XLRM-type connector insert at its base, allow-
ing it to be plugged directly into an XLRF-type panel jack or  microphone
cable. In addition to an AT8474 low-profile isolation mount, an AT8473
stand clamp is included to permit attachment of the XLR mic base to a
standard 

5

/

8

"-27 or 

3

/

8

"-16 threaded mic stand or mounting flange.

The ES915SC is available in the following models and lengths:
• ES915SC12: 304.8 mm (12.00") 
• ES915SC15: 381.0 mm (15.00")  
• ES915SC18: 457.2 mm (18.00") 
• ES915SC21: 533.4 mm (21.00") 
• ES915SC24: 609.6 mm (24.00") 

INSTALLATION AND OPERATION

The ES915SC requires 11V to 52V phantom power for operation.

Output is low impedance balanced. The output connector mates with
XLRF-type cable connectors. The balanced signal appears across Pins
2 and 3, while the ground (shield) connection is Pin 1. Output is phased
so that positive acoustic pressure produces positive voltage at Pin 2, in
accordance with industry convention.

The microphone can be mounted on a podium or desktop with the
included AT8474 low-profile isolation mount. Designed to be mounted
either above or beneath the mounting surface, the AT8474 firmly
secures the microphone while providing maximum attenuation of noise,
shock and vibration transmitted through the mounting surface.
Installation details are provided on the back of this sheet. An AT8473
stand clamp is also included to permit attachment of the XLR mic base
to a standard 

5

/

8

"-27 or 

3

/

8

"-16 threaded mic stand or mounting flange.

The provided snap-on foam windscreen simply slips over the 
element, effectively reducing wind noise and “popping.”

An integral 80 Hz high-pass UniSteep

®

filter provides easy switching

from a flat frequency response to a low-end roll-off. The roll-off position
reduces the pickup of low-frequency ambient noise (such as traffic, air-
handling systems, etc.), room reverberation and mechanically coupled
vibrations. To engage the UniSteep

®

filter, use the end tip of a paperclip

or other small pointed instrument to slide the switch toward the “bent”
line.

While a modern condenser microphone is not unduly sensitive to the
environment, temperature extremes can be harmful. Exposure to high
temperature can result in gradual and permanent reduction of the out-
put level. Avoid leaving the microphone in the open sun or in areas
where temperatures exceed 110° F (43° C) for long periods of time.
Extremely high humidity should also be avoided.

ES915SC 

CARDIOID CONDENSER GOOSENECK 
MICROPHONE WITH MUTE SWITCH/LED

ARCHITECTS AND ENGINEERS SPECIFICATIONS

The microphone shall be a fixed-charge condenser designed for 
permanent installation or portable applications. It shall have a cardioid
polar pattern with uniform 120° angle of acceptance and shall be
capable of accepting optional interchangeable elements for additional
polar patterns. It shall have a frequency response of 30 Hz to 20,000
Hz and be capable of handling sound input levels up to 138 dB with a
dynamic range of 109 dB. Nominal open-circuit output voltage shall be
10.0 mV at 1 kHz, 1 Pascal. Output shall be low impedance balanced
(250 ohms).

The microphone shall operate from an external 11V to 52V DC 
phantom power source. It shall offer outstanding rejection of radio 
frequency interference (RFI). The microphone shall be RoHS compliant.

The microphone shall be a double gooseneck design permitting highly
flexible positioning and noiseless operation. It shall incorporate a self-
contained power module with an XLRM-type connector at the base 
for direct connection to a mating XLRF-type panel jack or cable 
connector. The power module shall include a recessed switch for low-
frequency roll-off. The low-frequency roll-off shall be a tailored roll-off
at 80 Hz to minimize pickup of unwanted mechanical noise.

The microphone shall incorporate an illuminating mute switch in 
the power module. The mute switch shall illuminate when the 
microphone is on. The switch shall be quiet in operation with no
mechanical clicks or pops and shall always return to the off position
(after momentarily turning on to verify microphone connection) when
phantom power is restored.

A universal isolation-type shock mount suitable for above or below 
surface installation shall be supplied for mounting the microphone 
in a solid surface. It shall be possible to fir mly secure 
the microphone in the mount. The mount shall include appropriate
hardware for installation. For alternative mounting and portable 
applications, the microphone shall be supplied with a stand clamp to 
permit attaching the microphone directly to a standard 

5

/

8

"-27 or 

3

/

8

"-16 thread. A snap-on foam windscreen shall also be included.

The microphone shall be a small-diameter double gooseneck design,
with an overall length of [12.00" (304.8 mm): ES915SC12];
[15.00" (381.0 mm): ES915SC15]; [18.00" (457.2 mm): ES915SC18];
[21.00" (533.4 mm): ES915SC21] [24.00" (609.6 mm): ES915SC24].
Head diameter shall be 0.33" (8.4 mm). The microphone weight shall
be [4.4 oz (125 grams): ES915SC12]; [4.6 oz (130 grams):
ES915SC15]; [4.8 oz (135 grams): ES915SC18]; [4.9 oz (140 grams):
ES915SC21]; [5.1 oz (145 grams): ES915SC24]. Finish shall be low
reflectance black.

The Audio-Technica [ES915SC12]; [ES915SC15]; [ES915SC18];
[ES915SC21]; [ES915SC24] is specified.

AT8474 LOW-PROFILE ISOLATION MOUNT INSTALLATION
INSTRUCTIONS
MOUNTING DIMENSIONS 
A.

1

/

16

" (1.5 mm) pilot holes 3 places on 1.57" (40.0 mm) circle.

B.

1.00" (25.4 mm) hole through the mounting surface.

C.

Outside edge of mount, 2.06" (52.4 mm) diameter.

Drawing not actual size.

1. The AT8474 mount can be mounted either above or below the table 

surface.

Continued on back.

C

B

A

Отзывы: