Clockaudio TIM-1000, Руководство пользователя

Страница: 26 / 44

Page 18 of 35 V1.4 2019-09
5.3.5 Software upgrade
When new code is released, you can update the code on the unit by clicking in the box and browsing
to the appropriate section and selecting the file or by opening up the area where the file is located
and dragging it over into the box. Once done, the upgrade process will start. Stopping mid-way
during the process means no upgrade and product can be booted using the older version.
Latest software versions will be available from the www.clockaudio.com under TIM-1000.
5.3.6 Advanced controls
Two buttons are displayed here

“Change password” – Change password allows you to change passwords for the Home and
Advanced tabs. See section on changing “Password reset via GUI”.

“Reboot and apply ALL settings” – Reboot and apply ALL settings basically does what it says.
During the reboot process, contact with the server may disappear, and the GUI will need to be
restarted.
Note: Depending upon the DHCP server configuration, it may assign a different IP address to the
unit when rebooted.