Clockaudio TIM-1000, Руководство пользователя

Страница: 32 / 44

Page 24 of 35 V1.4 2019-09
9 Factory Configuration
The following table describes the status of the TIM-1000 after reset.
Factory setting or
after Button Reset Reset via UDP After s/w install Power-on reset
Tracking ON ON Retained as set Retained as set
Noise
Suppression ON ON Retained as set Retained as set
APT OFF OFF Retained as set Retained as set
EQ settings Low, Mid and High
all set to “0” Low, Mid and
High all set to “0” Retained as set Retained as set
Unit set as Master Master Retained as set Retained as set
Control IP
address DHCP Retained as set Retained as set Retained as set
Dante IP
address DHCP Retained as set Retained as set Retained as set
Product name TIM-1000-<last six
digits of Mac
Address> Retained as set Retained as set Retained as set
Time 07-Jan-2019 10:10
am Retained as set Retained as set Retained as set
NTP server 0.0.0.0 0.0.0.0 Retained as set Retained as set
Date format DD/MMM/YYYY Retained as set Retained as set Retained as set
Colour of LED GREEN after boot GREEN after boot Retained as set Retained as set
NOTE: After applying a factory reset via depression of the reset button on the top of the unit, default
image as loaded at the factory is reinstalled. Please check the Clockaudio website for the latest
released code and install it on TIM-1000 (see section 5.3.5).