Clockaudio TIM-1000, Руководство пользователя

Страница: 24 / 44

Page 16 of 35 V1.4 2019-09
5.2.4 Light Ring
This provides the ability to set the colour of the light ring from the GUI.
Note: If the LED ring is required to illuminate different colours/brightness for different functions e.g.
active, mute… then UDP commands should be used program the LEDs colours.
On this GUI panel, there are two other panels.

Brightness – Clicking in this box and dragging the cursor down varies the brightness of the
colour ring on TIM-1000. As the cursor is dragged from the top of the box towards the
bottom, the panel’s display changes from white to a darker shade of grey. Brightness can be
varied from 100% (maximum brightness) down to 16% with its value displayed at the bottom
of the intensity panel. As the cursor is hovered over the box displaying the value, an “Off” is
displayed. Clicking in this section will set the LEDs to OFF. Thus allowing the LED ring to be
switched off completely.

Colour – Clicking in this box opens a colour pallet that allows the colour of the LED ring to be
chosen while the rest of the screen goes grey. Select the desired colour and click outside of
the colour wheel to exit. Quick access to set the LED ring for Red, Green or Blue, can be
achieved using the appropriate panel under the colour wheel.