Clifford Concept 650MkII, Руководство по установке

Страница: 51 / 60

© 2007 directed electronics
49
7. Adjust Warn-away zone
z Press .
z Siren chirps 2 times.
z Sensor adjustment mode is entered.
z Hit vehicle at the desired level of impact.
z Sensor adjusts itself to the force of Hit.
z Siren chirps 1 time as confirmation of adjustment.
z Press to lock adjustment.
8. Press to re-enter Primary zone adjustment
z Siren chirps 2 times.
z Primary zone can now be re-adjusted as described in #4.
z Or press again to exit programming mode.
z
The siren will chirp 3 times when sensor adjustment mode has been exited.
second unlock feature
ON: System will monitor disarm channel for 10 seconds after disarm, if disarm chan-
nel is again transmitted within 10 seconds, H1/15 Blue/white will generate the
programmed unlock output.
OFF: H1/12 Blue/white wire will generate the programmed unlock pulse at the same
time as first unlock.
auto-immobilisation feature
Immobiliser circuits automatically activate after 30 seconds.
N NO OTTEE:: H1/12 orange ground when armed will not activate during Auto-
Immobilisation
auto-immobilisation sequence
1. Turn ignition off or disarm alarm
2. After 30 seconds the systems Immobilisation circuits activate and engage the
starter and ignition interrupt
3. LED flashes at ½ normal speeds.
Disarm the system when immobilised
Use one of the following methods to turn off auto-immobilisation
z Turn ignition on and press the button of the transmitter.
z Arm the alarm and then disarm the alarm.
z
Turn the ignition on and enter the system valet/PIN code.