Clifford Concept 650MkII, Руководство по установке

Страница: 46 / 60

www.directed.com
44
Note #5: Accessory Channels
z
All accessory channels can be programmed to different types of outputs includ-
ing a pulsed output that does not function when ignition is on or the system is
armed, a pulsed output regardless of the ignition/armed state, a timed output,
a latched output, or a latched output that resets with ignition on.
z Accessory channel C can be programmed to auto-activate with the arm
command of the transmitter, the disarm command of the transmitter, or both.
Auto-activate can also be turned off and activate as a normal addition accessory
channel output.
smart power up II
The Smart Power Up II feature ensures that when the security system is powered back
up after being disconnected, the system will resume the same state it was in before
power was lost. For example, if power is disconnected during a full trigger sequence,
the system will still be in the full trigger sequence when power is reconnected to the
unit. If power is disconnected while the unit is disarmed, it will still be disarmed when
power is restored.
remote control sensor disable
1. Arm the system.
2. Use the transmitter to bypass the sensor.
3. The lights will flash four times. All warn away zones are now bypassed.
4. Transmit the sensor bypass channel again.
5. The lights will flash four times again. The sensor warn away and full trigger
zones are now bypassed.
6. The sensor zones will reset when disarmed.