Clifford Concept 650MkII, Руководство по установке

Страница: 33 / 60

© 2007 directed electronics
31
* This feature is not evaluated by Thatcham.
cliffnet wizard pro installation software programming
Cliffnet Wizard Pro provides access to all available system features and some that are
not available when manually programming with the Valet switch. Cliffnet Wizard Pro
is compatible with Microsoft Windows 2000/ME/XP/NT so most programming oper-
ations can be accomplished by pointing and clicking with a mouse. This eliminates the
need for programming grids and lengthy programming sequences. For a complete
guide to system programming using the Cliffnet Wizard Pro refer to the Cliffnet
Wizard help menu.
manual programming instructions
It is a good idea to document changes by taking note of all feature changes made in
programming mode.
To enter the User Selectable Features programming:
1. Ignition on - Turn the ignition to the run position or start the engine.
2. Hold/Chirp/Release - Press and hold until a chirp is heard and the LED
turns on, then release the button. You have now entered the feature selection
position of the User Selectable Features grid.
3. Column select - Press the same number of times as the desired column. After
a pause the siren will chirp the same number of times as the selected column for
confirmation.
4. Feature select - Press the same number of times as the desired feature. The
siren will chirp with each press. The feature can now be changed using the
remote control.
5. Feature change - Press the button on the transmitter. If the system chirps
once, the feature has just turned off; if the system chips twice, the feature has just
turned on. If the feature has more than two settings, continue pressing the
arm/disarm button on the transmitter to toggle through the settings.
To advance to the next feature in the same column, press the same number
of times as the desired feature within 60 seconds; to change a feature in a
different column begin at step 4 by entering the column number first and then
the row number.
6. Grid Jump - To change a feature in a different feature grid - Press and hold the
button for 10 seconds and you will jump from one grid to another. (e.g. You
are in the user programming grid and would like to jump to the installer grid.
Press and hold
for 10 seconds, you will hear 3 chirps indicating installer