Clifford Concept 650MkII, Руководство по установке

Страница: 31 / 60

© 2007 directed electronics
29
Zones that are triggered at the time the system is armed are reported by an additional set
of status chirps called Malfunction AutoBypass. The specific zone bypassed is then report-
ed by the LED. For more zone information, refer to
Table of Zones section of this guide.
disarming
If a zone is triggered, three disarm chirps will sound. The specific zone that was trig-
gered is then reported by the LED when the ignition is turned on. For more zone infor-
mation, refer to the
Table of Zones section of this guide.
system status chirps
remote siren silencing
While the siren is sounding, press the arm/disarm button once to silence the siren but
leave the system in the armed state. To disarm the system, press the arm/disarm but-
ton a second time.
N NO OTTEE:: If the remote control battery is low, the siren will generate a single low pitched
chirp when disarming.
Action No. of Chirps Description
Arm 2 System armed
Arm 4 System armed with boot or bonnet
active and bypassed (zones 5 and 6)
Arm 2 (5-second pause) 4 System armed with door active and
bypassed (zone 4)
Arm 2 (10-second pause) 4 System armed with sensor active
and bypassed (zones 1, 2, 3, and 8)
Disarm 3 System disarmed with tamper alert
Disarm 1 System disarmed
Disarm 1 (low pitch) System disarmed with transmitter
low battery warning