Clifford Concept 650MkII, Руководство по установке

Страница: 37 / 60

© 2007 directed electronics
35
user selectable features descriptions - column three
The features in this column pertain to programming individual transmitter channels in
custom configurations. Following is an explanation of the features. Program the indi-
vidual transmitter channels following the instructions in programming note #2.
arm/disarm only
z The remote control channel programmed into this feature will arm/disarm the
system only.
* This feature/accessory is not evaluated by Thatcham.
N NO OTTEE:: When programming a new remote control to custom configuration a channel
must first be programmed to this feature before programming the remaining channels.
accessory a output
z The transmitter channel programmed into this feature will activate the accessory
output.
accessory b output
z The transmitter channel programmed into this feature will activate the accessory
output.
silent mode
z The transmitter channel programmed into this feature will arm/disarm the
system, but the siren will not chirp.
remote valet
z The transmitter channel programmed into this feature will make the system
enter/exit valet mode.
remote start
z This feature is only available with IntelliStart connected
z
The transmitter channel programmed into this feature will activate or shut down
the Intellistart remote start system.
window control
z This feature is only available with SmartWindows connected
z The transmitter channel programmed into this feature will activate the vent or roll
down feature of the SmartWindows system.
accessory c output