Clifford Concept 650MkII, Руководство по установке

Страница: 48 / 60

www.directed.com
46
loop is cut, then a 3-degree threshold is selected for normal sensitivity.
A ARRM MIIN NG G D DEELLA AY Y
The WHITE loop sets the amount of time the sensor waits before it will become active.
A 10-second delay is the default setting. If the WHITE loop is cut, then a 2-minute
delay is selected before becoming active.
adjusting the proximity sensor
It is recommended that adjustments be performed away from fluorescent lighting,
large metal structures, or confined areas that can affect the sensor field. The proxim-
ity sensor field takes about one to two minutes to settle after it receives power. Make
the first adjustment with the remote control after about 45 seconds. If the alarm does
not see an adjustment signal, it will exit adjustment mode after 60 seconds. Make the
adjustments slowly to let the sensor field settle. Each zone has 32 settings that are indi-
cated by chirps that raise and lower in frequency as adjustments are made.