Clevo X170SM-G, Руководство пользователя

Страница: 241 / 324

Troubleshooting
Problems and Possible Solutions 7 - 7
7
Problems and Possible Solutions
Problem Possible Cause - Solution
You turned on the power but it doesn’t
work.
Battery missing / incorrectly installed.
Check the battery bay, make sure the
battery is present and seated properly (the design of the battery only allows it to
go in one way). Make sure there’s nothing interfering with the battery contacts.
The battery LED power indicator ,
is blinking orange.
Low Battery.
Plug in the DC power source. If the computer doesn’t start up
immediately, turn it off then on again.
You are losing battery power too quickly.
The system is using too much power.
If your
OS
has a
Power Options
scheme
(see
“Power Plans” on page 3 - 6
) check its settings. You may also be using a
peripheral device/USB device
that is drawing a lot of power.
Actual battery operating time is shorter
than expected.
The battery has not been fully discharged before being recharged.
Make sure
the battery is fully discharged and recharge it completely before reusing (see
page
3 - 22
).
Power Options have been disabled.
Go to the Control Panel in
Windows
and
re-enable the options.
A peripheral device/USB device is consuming a lot of power.
Turn off/remove
the unused device to save power.
The system will not start up when it is
being operated in a low temperature
environment .
This is due to the electrical characteristics of battery cells at low
temperatures.
Although the lowest operational temperature tolerance of the
system is listed at 5°C, however if the system is in DC mode (on battery), the
battery must have a remaining charge capacity of 60%+; at 10°C or above.