58
Step 6
Remove Tether Hook from its storage location
on back of car seat. See “Top Tether
Storage” on page 89.
• Lengthen Top Tether belt by pressing
and holding Tether Adjuster while
pulling strap as shown in
Figure 76
.
• Place Tether Hook in the seat of the
car seat.
Step 7
(If installing with LATCH and
vehicle belt)
This car seat may be installed forward-
facing with both LATCH and the vehicle
belt.
This type of installation will allow the
LATCH to be used until the child reaches the
maximum size requirements of the seat.
IMPORTANT:
NEVER install this car seat
using both LATCH and vehicle belt if
prohibited in the vehicle’s owner’s manual
or if either of the conditions shown in
Figures 77
and
78
exist.
Figure 76
Figure 78
Vehicle belt is
located in between
LATCH lower anchors
Figure 77
Vehicle belt buckle is
located in between
LATCH lower anchors