26
Step 2
Use Troubleshooting Tool to install Headrest:
• From back of car seat, place the
Headrest support rods into the Headrest
Guides on top of the seat back.
• Place the metal pin located on the
end of the Troubleshooting Tool into
the pinhole on the Headrest guide
located on the right side of the seat
(when facing the back of the seat)
(1).
• While pressing in on Troubleshooting
tool, push Headrest down until the
Headrest Support Rods slide down into
the seat
(2),
as shown in
Figure 18a.
Step 3
Press the button on the Headrest Adjuster
located on the left-hand side of the seat
(when facing back of the seat)
(1),
and
push the Headrest down until it locks
into place
(2),
as shown in
Figure 18b.
Step 4
Store Troubleshooting Tool in storage spot
on Shoulder Harness Access Panel.
1
2
Step 2
Press the button on the Headrest Adjuster
located on the right-hand side of the seat
(when facing front of the seat)
(1)
, and push
the Headrest down until it locks into place
(2),
as shown in
Figure 17b.
• Once the Headrest slides down on
that side, release and store the
Troubleshooting
tool.
2
1
Figure 18a
Figure 18b