32
Figure 33
Figure 35
Step 4
Remove Shoulder Harness Access Panel from
back of car seat:
• Twist the Access Panel Lock counter-
clockwise and pull to remove as shown
in
Figure 33
.
Step 5
Remove loops at ends of Shoulder Harness
Straps from Metal Harness Plate by sliding
strap out through slot in Metal Harness Plate
as shown in
Figure 34
.
Step 6
From front of car seat, pull Shoulder Harness
Straps out of seat back.
SHOULDER HARNESS RETHREADING
Step 1
Check that Shoulder Harness Straps are not
twisted and from front of seat, insert Shoulder
Harness Straps through the desired Shoulder
Harness Slots as shown in
Figure 35
. Straps
must go through the Shoulder Harness Slots
at the same height on each side
Figure 34