43
Child seat is
properly re
clined in Rea
r-Facing mo
de when th
e line
appropriate
for the chil
d’s weight i
s parallel to
the ground
USE THIS LINE FOR INFANTS UNDER 22 lbs (10 kg)
USE THIS L
INE FOR CH
ILDREN BET
WEEN 22 -
50 lbs (10
- 22.7 kg)
Rear-
Facin
g
1
3
• To R
elease
Rigid
LATCH
Conn
ectors:
Fully e
xtend
Conn
ectors
, then
pull R
ed Rig
id LATCH
Release
Hand
les.
2
Forwa
rd-Fa
cing
Rear-
Facin
g
Child seat is
properly reclined in Rear-Facing mode w
hen the line
appropriate
for the chil
d’s weight i
s parallel to
the ground
USE THIS LINE FOR INFANTS UNDER 22 lbs (10 kg)
USE THIS L
INE FOR CH
ILDREN BET
WEEN 22 -
50 lbs (10
- 22.7 kg)
Rear-
Facin
g
1
• To Release Rigid LA
TCH Connectors:
Fully extend Connectors, then pull Red Rigid LA
TCH Release Handles.
Forwa
rd-Fa
cing
Step 14
Verify that the Rear-Facing Level Reference
Line appropriate for the child’s weight
is parallel to the ground as shown in
Figure 54
. If not, go back to
Step 10
adjust
the recline level and try installing again,
or move the seat to a different vehicle
seating position.
NOTE:
If needed, a rolled towel or pool
noodle may be placed under the foot end of
the car seat to achieve an acceptable recline
level.
Step 15
Install Seat Cushion, see “Removing/Installing
Seat Cushion” on page 83.
Figure 54