41
Figure 49
Step 9
Secure Rear-Facing LATCH Connectors to
the vehicle LATCH lower anchors. For each
LATCH Connector:
• Position red release button of Rear-
Facing LATCH Connector facing away
from car seat.
• Align LATCH Connector with the vehicle
LATCH lower anchor and press the
LATCH Connector against the LATCH
lower anchor until you hear the LATCH
Connector click, as shown in
Figure 49
.
• Pull on LATCH Connector to check that it
is securely locked on the vehicle LATCH
lower anchor.
Step 10
Position the seat so that the Rear-Facing Level
Reference Line appropriate for the child’s
weight is parallel with the ground as shown
in
Figure 50
.
• If using with an infant under 22 lb (10
kg), position the seat with the more
reclined Reference Line (top line) parallel
to the ground.
• If using with an older child who is over
22 lb (10 kg), position the seat with the
more upright Reference Line (bottom
line) parallel to the ground.
Figure 50
Child seat is
properly re
clined in Rea
r-Facing mo
de when th
e line
appropriate
for the chil
d’s weight i
s parallel to
the ground
USE THIS LINE FOR INFANTS UNDER 22 lbs (10 kg)
USE THIS L
INE FOR CH
ILDREN BET
WEEN 22 -
50 lbs (10
- 22.7 kg)
Rear-
Facin
g
1
3
• To R
elease
Rigid
LATCH
Conne
ctors:
Fully e
xtend
Conn
ectors
, then
pull R
ed Rig
id LATC
H Rele
ase H
andles
.
2
Forwa
rd-Fa
cing
Rear-
Facin
g
Child seat is
properly reclined in Rear-Facing mode w
hen the line
appropriate
for the chil
d’s weight i
s parallel to
the ground
USE THIS LINE FOR INFANTS UNDER 22 lbs (10 kg)
USE THIS L
INE FOR CH
ILDREN BET
WEEN 22 -
50 lbs (10
- 22.7 kg)
Rear-
Facin
g
1
• To Release Rigid LA
TCH Connectors:
Fully extend Connectors, then pull Red Rigid LA
TCH Release Handles.
Forwa
rd-Fa
cing
