Cleco LIVEWIRE TMEC-200 Series, Руководство по программированию

Страница: 70 / 110

70 P1934E/EN 2009-04
en03c381.fm, 23.04.2009
Programming
3
WPA-PSK - WEP
The WPA protocol with pre-shared key (PSK) and WEP
encryption is used to establish a connection. The net-
work key must consist of 8 – 63 alphanumeric charac-
ters.
If this encryption is enabled, it can take up to 30 seconds
to store the settings in the tool.
WPA/WPA2-PSK -
TKIP
The WPA/WPA2 protocol with pre-shared key (PSK) and
TKIP encryption is used to establish a connection. The
network key must consist of 8 – 63 alphanumeric charac-
ters. If this encryption is enabled, it can take up to 30
seconds to store the settings in the tool.
WPA/WPA2-PSK -
AES
The WPA/WPA2 protocol with pre-shared key (PSK) and
CCMP (AES) encryption is used to establish a connec-
tion. The network key must consist of 8 – 63 alphanu-
meric characters. If this encryption is enabled, it can take
up to 30 seconds to store the settings in the tool.
CISCO LEAP
Lightweight Extensible Authentication Protocol (LEAP) is
used to establish a connection to an authentication
server. Entry of user name and password is required.
Only available for tools from the 17BPX… and 47BAX…
series.
WPA 802.1x -
WEP
The WPA protocol, IEEE 802.1x authentication (EAP)
and WEP encryption are used to establish a connection.
Entry of user name and password is required.
Only available for tools from the 17BPX… and 47BAX…
series.
WPA 802.1x -
TKIP
The WPA protocol, IEEE 802.1x authentication (EAP)
and TKIP encryption are used to establish a connection.
Entry of user name and password is required.
Only available for tools from the 17BPX… and 47BAX…
series.
WPA 802.1x - AES
The WPA protocol, IEEE 802.1x authentication (EAP)
and CCMP (AES) encryption are used to establish a con-
nection. Entry of user name and password is required.
Only available for tools from the 17BPX… and 47BAX…
series.
Network key
confirmation If WEP encryption is active, entry and confirmation of the network key is
required.
User name /
Password /
Password
con-
firmation
Specifies the user name and password combination for authentication in a
LEAP or 802.1x network.
Only available for tools from the 17BPX… and 47BAX… series.
Obtain an IP
address
automatically
(DHCP)
Defines whether the IP address is obtained automatically from a DHCP
server or access point. If automatic address assignment is used, it must be
ensured that the DHCP server or access point always uses the IP address
assigned for this specific tool.
The automatically obtained IP address of the tool is displayed on the tool in
the
WLAN wireless transmission menu.