Cleco LIVEWIRE TMEC-200 Series, Руководство по программированию

Страница: 26 / 110

26 P1934E/EN 2009-04
en03c381.fm, 23.04.2009
Programming
3
3.2.4 Advanced parameter default values
Parameter name Stage 1 Stage 2
Start delay time [mS] 0 0
Start spike time [mS] 0 0
Max. fastening time [ms] 10000 10000
End delay time [mS] 0 30
Torque Filter Factor 1 1
If an Application with more than two stages is required, or if a different Fastening Strategy is to be
selected for the Application than the one described above, you must use the Standard Applica-
tion Builder.
3.2.5 Basic Application Builder / Copy
c003
62
en
.bm
p
Fig. 3-4: Copying
Using the Basic Application Builder, you can copy the parameters from one Application to
another by pressing the <F3> softkey. This dialog box allows you to specify the source tool, the
target tool and the Application. When you use the copy function in the Basic Application Builder,
all the stages for the selected Application are copied. You can specify multiple target Applica-
tions; to do so, separate the numbers for each Application with a dot as shown.
Basic.txtE