Cleco LiveWire P1891E, Инструкция по эксплуатации

Страница: 36 / 88

36 P1891E/EN 2014-02
1891c-enu_LCD_bedingt.fm, 25.04.2014
LCD display
7
7.3.9 Wireless transmission submenu 868 MHz –
only for models of the 47BAR(…)
The 868 MHz wireless transmission submenu shows the settings being used.. If no actions are carried out,
the menu is automatically exited after 60 seconds.
Programming the wireless settings is described in the controller programming manual.
Displays the installed software version of the wireless module.
Displays the wireless channel being used and allows you to configure settings.
With 868 MHz, you can select channel 1 – 3.
 <F1>: Activate a lower channel.
 <F2>: Activate a higher channel.

Press the start button or <F2> longer than 2
seconds to accept the select and display the next menu item.
 Press <F1> longer than 2 seconds
to delete the selection and exit the menu.
The channel must match the set channel of the base station.
Defines the network identification. You can operate no more than 4 tools per network ID.
 <F1>: Activate a lower network ID.
 <F2>: Activate a higher network ID.

Press the start button or <F2> longer than 2
seconds to accept the selection and display the next menu item.
 Press <F1> longer than 2 seconds
to delete the selection and exit the menu.
The network ID must match the set network ID of the base station.
Displays the tool ID and allows you to configure settings.
You can select a channel from 1 – 4.
 <F1>: Activate a lower network ID.
 <F2>: Activate a higher network ID.

Press the start button or <F2> longer than 2
seconds to accept the selection and display the next menu item.
 Press <F1> longer than 2 seconds
to delete the selection and exit the menu.
Each tool can be used only once for each base station.
Versio
B868
MC-tin
Chan-
nel
1/3
Networ
ID
1/16
Tool
ID
1/4