cleasby FIBERGLASS Series, Инструкция по эксплуатации

Страница: 96 / 112

Cleasby Conveyors Hydraulic Stabilizers
Cleasby Conveyors (Rev. 08/14/12) | Page 6-6
NEVER DRIVE THE TRUCK OR RACE THE ENGINE WHILE
THE P.T.O. IS ENGAGED. THE PUMP IS INSTALLED TO
OPERATE AT THE CORRECT SPEED AND TO PRODUCE
SUFFICIENT OIL FLOW WHEN THE TRUCK IS IDLING. IF
THE TRUCK IS DRIVEN OR THE MOTOR RACED WHILE
THE PTO IS ENGAGED, THE PUMP MAY BE DAMAGED
OR THE DRIVE LINE MAY FLY APART
MAINTENANCE
1.) Check to see that cotter pins or hairpin clips
secure all hinge pins.
2.) Inspect hydraulic hoses for damage or leaks.
Weekly Maintenance
1.) Check to see that cotter pins or hairpin clips
secure all hinge pins. Check pins for wear.
2.) Inspect hoses and fittings for damage or leaks.
3.) Check and tighten all bolts and nuts.
Annual Maintenance and Preparation for
Storage
1.) Check cylinder seals and valve seals for
leakage
.
2.) Tighten bolts securing cylinder ends.
3.) Replace any worn hinge pins.
4.) Before storing, retract stabilizers to retract
cylinder rods. Coat exposed rods with hydraulic
fluid.
5.) Please see OSHA 29 CFR 1926.1400.
...See next page for Parts List