cleasby FIBERGLASS Series, Инструкция по эксплуатации

Страница: 14 / 112

Cleasby Conveyors Warnings and Cautions
6.) Weight Limits. Note and observe
weight limits and load capacities of each
conveyor. Each conveyor has a weight
limit/load capacity of eighty (80) pounds
per flight (cleat). That means, if eight
(8) flights are showing on the top side of
the conveyor at any one time, the load
capacity is 720 lbs., to be distributed at
no more than ninety (90) pounds in front
of any given flight. Operating the
conveyor with loads in excess of safe
limits is hazardous.
Operation
1.) Do not operate the equipment
until you have set-up an operating
SAFETY ZONE around the truck and
equipment,
(see General Instructions,
Section Two, and Figure 1-1, Page 1-
7)
. Always review operating
instructions, decals and written
brochures before attempting to
operate the equipment.
2.) Missing Safety Device. Do not
operate the conveyor if it is missing any
guard, or other safety device.
3.) Hands and Arms. Do not reach
through any piece of equipment for any
reason, whether it is in operation or not.
4.) People around Boom. Never allow
anyone to stand under the boom,
whether it is in operating or not.
Maintain the SAFETY ZONE. Be
especially watchful while raising,
lowering or rotating the conveyor.
5.) Unauthorized Personnel. Do not let
unauthorized and untrained individuals,
especially small children, on, near or
around the equipment.
6.) Training before Operating. Do not
attempt to use the conveyor equipment
unless you have been fully trained in its
proper use and operation.
7.) Training on Turntable Controls. Do
not attempt to raise, lower or rotate the
boom, or run the belt on the turntable-
mounted conveyor unless you are
familiar with the hydraulic valves,
control handles and functions.
8.) Unobstructed View. Operate the
conveyor only when your view of the
conveyor and the surroundings is
complete and unobstructed. It is
recommended that a “
spotter
” be used to
watch the equipment as you move it.