cleasby FIBERGLASS Series, Инструкция по эксплуатации

Страница: 61 / 112

CLEASBY CONVEYORS MAINTENANCE & SERVICE INSPECTION LIST (CON’T)
Turntable Model # Serial #
D
Check safety and warning decals for legibility and replace if
necessary
D Check velocity fuse, hose and restrictor fitting and replace if missing
D Check hydraulic hose and fitting for leaks and replace if necessary
D Check four spool control valve for smooth operation
W
Check cylinder pins, washers and cotter pins, replace if worn or
missing
W
Check hydraulic reservoir for proper oil level. Change oil semi-
annually
W
Check brass wear pads and Teflon wear plug for wear, replace if
necessary
W Check post cylinder ears and weld for cracks and repair if necessary
W Check control valve handles and labels, replace if necessary
M Check inner and outer post for wear and excessive play
M Check gear bearing for excessive wear and grease as needed
M
Check gear bearing bolts, replace if worn, cracked, stripped or
broken
M Check pinion gear and gear bearing for alignment
M
Check top and bottom inner post cylinder pins and cotters, replace if
necessary
M Check all metal welds for cracks and wear
M Check turntable mounting bolt and blocks for wear
M Check turntable posts for grease. Add grease as needed.
S Change hydraulic oil filter on return line
Stabilizer Model # Serial #
D Check safety decals for legibility, replace if necessary
D Check control valve for smooth operation
D Check holding valve on stabilizer leg
D Check hydraulic hoses and fittings for leaks, replace if necessary
W Check hydraulic cylinder, pins and cotter, replace if necessary
W Check hydraulic cylinder ears and welds on legs for wear
W Check Stabilizer foot, leg and hinge pins for wear
W Check control valve handles and labels, replace if necessary
M Check stabilizer frame welds for cracks and wear, repair if necessary
Powerbed Model # Serial #
M Check pinion and gear alignment
M Check gears for damage and wear
M Check chains, links, and pins for wear and bending
M Check if push bar is bent, damaged or has cracks
M Check if 2x3 rails have cracks, damage or wear
M Check safety doors if bent or missing
M Check hoses and fittings for leaks or wear
M Check all welds for cracks
INSPECTION BY: * INSPECTION/REPAIR COMMENTS ON BACK PAGE
Cleasby Conveyors * 362 S. Main * Clearfield, Utah 84015 * (800) 453-2446
Page 2 of 3
(801) 773-1311 FAX: (801) 773-8608