cleasby FIBERGLASS Series, Инструкция по эксплуатации

Страница: 13 / 112

Cleasby Conveyors Warnings and Cautions
Cleasby Conveyors (Rev. 08/14/12) | Page 1-3
5.) Truck Wheels. Block truck wheels to
prevent rolling. The transmission will
not help because it must be in “neutral”
to power the conveyor hydraulic system.
6.) Stabilizers. Lower the stabilizers
(which are attached to the truck frame),
firmly to the ground in order to aid in
stabilizing the truck against rollover.
Vehicle Rotation Hazard, Risk of
Falling or other Serious Injury.
Do Not Operate on Un-level
Surface. Use Stabilizers.
7.) Inspect Job Site carefully before
repositioning the conveyor. Be aware of
equipment, workers, or other people on
the ground, by the building or on the
roof who may be affected in any way by
the movement or operation of the
conveyor.
8.) Keep truck and conveyor clear of
trees, scaffolding, earth overhangs etc. If
you bump them they could fall on
something...or someone.
9.) Operating in Wind. Do not operate
the conveyor in windy conditions. That
means: if there is a brisk breeze, do not
operate. IN NO CASE should you
operate the conveyor when the wind
exceeds 20 mph. In windy conditions,
store the conveyor boom securely over
the truck cab, and park the truck in a
sheltered area.
10.) Altering Equipment. Do not alter
the safety characteristics of the conveyor
or turntable. Do not remove or modify
any guards, safety valves, pressure relief
valves, etc.
11.) Wet Conditions. If your conveyor is
powered by an electric motor, operate
only when dry. Water on the truck bed,
conveyor or the ground increases the
risk of electrocution .
Uses
1.) Transport Only Materials. The sole
purpose of the conveyor is to transport
materials, not people. Using the
conveyor for any other purpose poses
hazards (see Warning label above and on
equipment).
2.) Conveyor not a Ladder. Do not use or
allow anyone else to climb on the
conveyor or use it as a ladder to reach a
roof or other elevated location.
3.) Running Conveyor. Do not ride,
stand or sit on a running conveyor, or
allow anyone else to.
4.) Valves and Handles. Do not use the
hydraulic valves and handles as steps or
rests to bear the weight of any materials
or people. Such abuse may damage the
valves and impair their function, creating
a hazardous condition.
5.) Conveyor Not a Crane. Do not use
the conveyor as a crane to pick-up and
lift, or rotate any objects or people.