cleasby FIBERGLASS Series, Инструкция по эксплуатации

Страница: 100 / 112

Cleasby Conveyors Safety and Warning Labels
SAFETY AND WARNING LABELS
Labels Placed by Manufacturar
Cleasby Conveyors (CM) places a number of
warning labels on the conveyor and turntable to
warn of dangers and to remond operators of correct
operating procedures.
WARNING LABELS
The warning labels contain important warning
information. Keep them visible and do not remove
them.
Instruct operators to review the warning labels daily
as they start to make their deliveries. This daily
review of safety precautions will help your
operators be more safety conscious, reducing
hazards to themselves, and to others who may work
near the conveyor.
Use care when cleaning to avoid damage to the
warning labels by strong solvents or steam. Mask
each label carefully before painting the unit. If the
labels become damaged or unreadable, replace them
promptly.
Labels to be Placed by You or Your
Installer
1.) Truck Cab Label. In addition to lables pre-
installed on turntable and conveyor, Cleasby
Conveyors provides two warning labels to attach to
the dash of the truck (See #13 and #15). Mount
these labels in clear view of the operator, and
protect them from damage as decribed above.
2.) Truck Bed Label: Cleasby Conveyors also
provides five (5) warning labels (see label #14 and
#20) that
must be placed at certian locations on the
truck bed (See reference drawings for truck decal
placement). These labels are 5 3/8 inches deep, so
if the truck on which you are installing the conveyor
is not thick enough to allow for good placement of
these labels, mounting brackets for the labels are
available from the manufacturer.
Diagrams:
Following are various figures depicting the
turntable and conveyor. Cleasby has pre-installed
labels on the actual turntable and conveyors of
which the figures are representative. Leader lines
or arrows on the diagram designate each labels
identification number and proper location on the
equipment.
At the time of delivery to you (and periodically
thereafter) look at the equipment with the manual in
hand, checking each label in turn until you are
satisfied that all labels are there, and that they are
all positioned as specified in the manual.
NOTE
Additional labels and truck bed mounting
brackets are available free of charge. Call
your local dealer, service center or
distributor. If there is no dealer in your area,
call Cleasby Conveyors (800) 453-2446.