Clean Energy CE-140, Руководство пользователя

Страница: 5 / 78

WARNING:
The CE-3 Burner is only approved for use on the CE 140, CE 180 or
CE 250 furnace. The CE-4 Burner is only approved for use on the CE 330 furnace.
Likewise, furnaces manufactured by Clean Energy Heating Systems are only approved
for use with burners manufactured by Clean Energy Heating Systems.
WARNING:
The installation, operation, and maintenance of this equipment in the
United States must be done by qualified personnel according to instructions in the
Clean Energy Heating Systems Owner’s Manual and in accordance with all national,
state, and local codes or authorities having jurisdiction and the following standards:
NFPA 30 Flammable and Combustible Liquids Code
NFPA 30A Automotive and Marine Service Station Code
NFPA 31 Installation of Oil Burning Equipment
NFPA 70 National Electrical Code
NFPA 88A Parking Structures
NFPA 88B Repair Garages
NFPA 211 Chimney’s, Fireplaces, Vents and Solid Fuel Burning Appliances
Likewise, the installation, operation, and maintenance of this equipment in Canada must
be done by qualified personnel according to instructions in the Clean Energy Heating
Systems Owner’s Manual and in accordance with all regulations and authorities having
jurisdiction and the following CSA Standards:
B139 Oil Burning Equipment
B140 General Requirements for Oil Burning Equipment
C22.1 Canadian Electrical Code, Part 1
GUIDELINES FOR FURNACE USE:
• This furnace is for industrial and/or commercial use only. This furnace is not intended
for residential use.
• This furnace is safety listed to burn the following fuels:
• #2 fuel oil
• Used crankcase oil up to 50 SAE
• Used hydraulic oil
• Used automatic transmission fluid (U.S.)
• The EPA regulations for burning used oil are as follows:
• Your supply of used oil is generated on-site. You may also collect oil from
“do-it-yourself” oil changers.
• Do not mix hazardous wastes, such as chlorinated solvents, with your used oil.
• The exhaust gases of the furnace must be vented to the outside with an
appropriate stack system.
• The furnace is used to recycle used oil for “heat recovery”. The furnace is not
to be used in warm weather just to dispose of used oil.
• Only trained authorized personnel should service and maintain the furnace. Be sure
the furnace receives annual maintenance to ensure safe and efficient operation.
5
SAFETY CONSIDERATIONS AND GUIDELINES
Approved Method to
Dispose of Waste Oil