Clavister NetWall W20A Скачать руководство пользователя страница 74 | Manualshive

Страница: 74 / 89

background image

Chapter 6: Warranty Service

Limitation of Warranty

Clavister warrants to the customer of the W20B Appliance that the Hardware components will be
free from defects in material and workmanship under normal use for a period of two (2) years
from the Start Date (as defined below). The warranty will only apply to failure of the product if
Clavister is informed of the failure not later than two (2) years from the Start Date or thirty (30)
days after that the failure was or ought to have been noticed by the customer.

The warranty will not apply to products from which serial numbers have been removed or to
defects resulting from unauthorized modification, operation or storage outside the
environmental specifications for the product, in-transit damage, improper maintenance, defects
resulting from use of third-party software, accessories, media, supplies, consumables or such
items not designed for use with the product, or any other misuse. Any replacement Hardware
will be warranted for the remainder of the original warranty period or thirty days, whichever is
longer.

Note that the term "

Start Date

" means the earlier of the product registration date OR ninety (90)

days following the day of shipment by Clavister.

Obtaining Warranty Service with an RMA

Warranty service can be obtained within the warranty period with the following steps:

1.

Obtain a Return Material Authorization (RMA) Number from Clavister. This number must
be obtained before the product is sent back.

An RMA number can be obtained online by logging in to the Clavister website
(http://www.clavister.com/login) and selecting the Help Desk option.

Note: The cold standby service uses a different procedure

If the defective unit is subject to a Clavister

Cold Standby

(CSB) agreement then

the procedure to follow is described in the relevant section of the separate

Clavister Hardware Replacement Guide

.

This guide also describes the cOS Core configuration steps for swapping any
Clavister firewall with a replacement unit.

2.

The defective unit should be packaged securely in the original packaging or other suitable

74

«
...
72
73
74
75
76
...
»

Содержание NetWall W20A


























































































Отзывы:

Нет отзывов

Похожие инструкции для NetWall W20A

Vb-C60 - Ptz Network Camera

Бренд: Canon Страницы: 30

Бренд: Patton electronics Страницы: 2

Бренд: Patton electronics Страницы: 86

WS-650 lite Series

Бренд: Laurell Страницы: 84

Бренд: YASKAWA Страницы: 68

Бренд: Profile Страницы: 6

Бренд: Freescale Semiconductor Страницы: 921

Бренд: Black Box Страницы: 9

Бренд: JETWAY Страницы: 55

Бренд: Tbus Страницы: 25

Бренд: Faderfox Страницы: 10

NetIron MLXe Series

Бренд: Brocade Communications Systems Страницы: 305

2000 IDU Series

Бренд: EMS Страницы: 52

Бренд: FOR-A Страницы: 2

Бренд: Hunter Страницы: 2

PXI PXITM -1000

Бренд: National Instruments Страницы: 55

Бренд: Allied Telesis Страницы: 2

Бренд: Kentrox Страницы: 246

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды