Clavister NetWall W20A Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 89

Clavister NetWall W20A Скачать руководство пользователя страница 65

Alternatively, the license file can be uploaded using SCP. cOS Core automatically
recognizes an uploaded license file but it is then necessary to manually to perform a
reconfigure or reboot operation to complete installation.

Important: Restart is recommended after license installation

After installing a license, a restart of cOS Core is recommended. This will ensure that cOS
Core memory is correctly configured for the license parameters.

When installing a license through the Web Interface or when using the startup wizard,
the options to restart or reconfigure are presented to the administrator. With the CLI and
SCP, these options are not presented and restart must be initiated by the administrator.

For restarting via the Web Interface, go to

Status > Maintenance > Reset & Restart

.

With the CLI, use the command:

Device:/> shutdown -reboot

Installing Licenses Updates

Installing license updates can be done using one of the following methods:

•

Automatically, by creating a permanent link between the W20B and the associated

MyClavister

account on the Clavister website. Doing this is one of the last options in the setup

wizard. Alternatively, the link can be established later by going to the Status > Maintenance
> MyClavister in the Web Interface and entering the login credentials for the Clavister
website.

The link can also be created in the CLI with the following command:

Device:/> license –myclavister –username=myuser –password=mypass

Once the link is established, cOS Core will alert the administrator in the Web Interface when a
license update is available. The update process is then initiated by pressing the Update
button in the license page.

•

Manually, by logging into and downloading from the Clavister website and then uploading
manually to cOS Core.

•

Automatically through the separate InControl software product which is used for managing
cOS Core configurations. This method can also be used to install the first license.

Licenses and license installation are described further in the separate

cOS Core Administrators

Guide

.

Chapter 4: cOS Core Configuration

65

«
...
63
64
65
66
67
...
»

Содержание NetWall W20A


























































































Отзывы:

Нет отзывов