Clarke PRO-MIST DURA, Инструкция и список запасных частей, Страница: 96 / 133

93
SMARTFLOW II
Calibration Factors (Cont.)
2. Speed Cal
SPEED CAL
displays the Distance Sensor Cal factor in
distance traveled between speed sensor pulses. It can
be changed from 0.001 – 655.36 cm per Edge (rise and
fall from pulse to pulse).
When using the Clarke Astro 5 GPS speed sensor,
the user must set Speed Cal to zero (no calibration is
required).
1. To set the SPEED CAL factor: Place the SmartFlow
II in Calibration mode by placing the rotary dial to
TARGET RATE and hold the CAL and INC buttons
together until the console reads SET and the red
Warning LED light is flashing.
2. Move the rotary dial to SPEED CAL position. The
Data Display window will show speed sensor
pulses. In the Application Rate Window, CAL is
displayed.
3. Use the
INC/DEC
buttons to set to zero.
4. Rotate the rotary dial to TARGET RATE , press
and hold the CAL button for 3 seconds to save
the change and exit Calibration mode.
3. CONT Speed
CONT SPEED
displays the Continuous Speed value
which can be adjusted from 2.0 – 45.0 mph or kph.
This Speed is used for all Application Rates when in
the
CONTINUOUS mode.
1. To set the CONT SPEED factor: Place the SmartFlow
II in Calibration mode by placing the rotary dial to
TARGET RATE
and hold the
CAL
and
INC
buttons
together until the console reads SET and the red
Warning LED light is flashing.
2. Move the rotary dial to CONT SPEED position.
‘SPEED’ is displayed in the in the Data display window
and the current Continuous Speed is displayed in the
Application Rate display window.
3. Use the INC/DEC buttons to increase or decrease
the speed.
4. Rotate the rotary dial to TARGET RATE , press and
hold the CAL button for 3 seconds to save the change
and exit Calibration mode.
SPEED
CAL
CONT
SPEED
CALIBRATION