Clarke PRO-MIST DURA, Инструкция и список запасных частей, Страница: 78 / 133

75
SMARTFLOW II
Rotary Dial Functions (Cont.)
5. Rotary Dial Position: VOLUME (1)(2)(3)
Function: Volume Pumped in Gallons or Liters
Three Volume counters are provided. When in the
VOLUME
position the selected counter is indicated by
the Number icon (1, 2, 3) in the Data display window
and a different counter can be selected by using INC
key. (Note the DEC key is not used since that is used
to clear the counter in some models). Cycling power or
brown outs will not change the selection. The user can-
not change the Counter selection while in
CALIBRATE
or SPECIAL CALIBRATE but it can be changed while
in Test Speed mode.
If a flow signal is present then Volume continues to
accumulate while in the
VARIABLE, CONTINUOUS
or
OFF mode. All three Volume counters are always active
and will accumulate volume (not just the selected
or displayed counter).
The Volume mode displays the volume pumped
from .01 – 999.99 gallons or liters and then from
1,000.0 – 9,999.9 gallons or liters and then from 10,000
– 99,999 gallons or liters. Once it reaches 99,999 it will
display “OFL” (Overflow) and stop counting. The user
must clear Volume to resume counting. Use the
RESET
button for clearing Volume.
Area and Volume counters are coupled together
(as pairs) so selecting Volume counter 1 also selects
Area Counter 1. This was done so user can easily see
how much Volume was applied to a particular area
(Volume 1 is always applied to Area 1, and Volume 2
to Area 2 etc.).
The Flowmeter Calibrate factor can be changed at any
time (before or after an application is completed) and
the correct Volume will be re-computed.
CONTROL PANEL FUNCTIONS