Clarke PRO-MIST DURA, Инструкция и список запасных частей, Страница: 4 / 133

1
PRO-MIST DURA® ULV
Warranty Information
Your Pro-Mist Dura is warranted to the original
purchaser by Clarke against defects in workmanship
or materials for a period of one (1) year from the
date of purchase from Clarke. If any warranted
component fails within that period, return the
component to Clarke, shipping prepaid, for repair
or replacement at its option. This warranty does not
include incidental damages arising from machine
failure, from incorrect use, or from improper or
neglect of maintenance.
This warranty covers only the repair or replacement
of warranted defective parts. It does not cover
components which normally wear out or are used
up during operation or through time. In the latter
category are items such as tubing, fittings and
rubber mountings.
Parts which prove to be defective will be repaired
or replaced free of charge FOB factory, provided:
1. The component was properly installed,
as per enclosed manual, given reasonable care,
protected from wet weather conditions and
freezing temperatures and used for its
intended purpose.
2. No repairs have been attempted by anyone other
than factory personnel. No alterations or adjustments
have been made to the electrical controls.
3. The component (s) have been returned
properly packaged, insured, and with
transportation charges prepaid.
4. Upon examination, Clarke personnel are satisfied
that the defects were not caused by abuse, or
subjection to conditions that violate the system
specifications or neglect.
5. When the component is plugged into a vehicle
electrical system, a volt check confirms that the
vehicle’s alternator is meeting automotive
standards 13.8 v to 14.8 v (15 v max) at the
alternator. This is required for both the
component and vehicle reliability.
All returns must have an authorization
number issued by
Clarke (1-800-323-5727)
.
Please call ahead to save time and cost
of having items returned. Thank you!
WARRANTY
Enter the information below for record
keeping purposes.
Serial Number_____________________________
Manufacturing Date _________________________
Firmware Version
______________________
Note:
The Firmware Version will quickly flash in the data
display window of the SmartFlow II console as it is
booting up. (r will be displayed, followed by a letter.
e.g. r F, designating Firmware Version F)