Clarke PRO-MIST DURA, Инструкция и список запасных частей, Страница: 109 / 133

106
SMARTFLOW II
Special Calibration Modes (Cont.)
1. Units
Selecting Area position displays Unit in the Application
Rate display and allows the user to change the Units.
Pressing the
INC or DEC button will toggle between
English and Metric and the Data display will show
Eng or mEt.
It is recommended that Units be changed by loading
English or Metric defaults because changing the Units
cal factor does not automatically convert other Cal
factors. Therefore if the Units are changed the user must
review and change all other cal factors (like Width) to
the correct value for those units, display will go blank
when in an unused Special Cal position.
2. Vehicle ID
Selecting Distance position displays I d in the Application
Rate display and allows the user to change the Vehicle ID
from 0 to 255.
3. Width
Selecting Time position displays UU idE in the
Application Rate display and allows user to change
the Width from 0.1 to 6,553.5 feet or 0.01 to
655.35 meters if Metric.
4. Control Speed
Selecting Speed position displays C-SPd in the
Application Rate display and allows the user to change
the Control Speed for the control algorithm. Pressing
the
INC or DEC key will adjust the Control Speed
from -4 to 3. It is normally set in the middle (-1) but if
needed, it allows the user to decrease or increase the
Control Speed for his particular system.
SPECIAL CALIBRATION MODES
SIZE
Tank Fill Size
SET PT
Tank Set Point
Snoo2
Max Snooze Count
ALERT
Maintenance Alert Time
PPR
Pulses Per Revolution Must Remain (2)
SH Hi
Spray Head RPM (High Limit) TYP. 30,000
SH Lo
Spray Head RPM (Low Limit)
tARg
Target Spray Head RPM (Speed) TYP. 28,000
UNIT
Units
ID
Vehicle ID
WJde
Width
C-SPD
Control speed