Clarke CA90 32T, Руководство по обслуживанию, Страница: 43 / 62

Scrub System 43 Service Manual – CA90 32T
• Place the tube portion of the actuator into the spring bracket so the holes line up.
• Insert the lower mounting pin, and secure it with the hairpin.
• Position the upper end of the actuator into the actuator bracket.
• Insert the upper mounting pin,
• Reconnect the actuator wires. (RED to wire 17, Black to wire 18)
• Wire tie all of the connectors so they cannot contact the linear actuator.
• Re-install the front cover.
Component Specifications (electrical)
Component Specifications
Scrub Deck Motor
RPM – 200
Current Draw – No Load - 3 Amps
Current Draw - Full Load - 6 - 8 Amps depending on floor
conditions
Scrub Deck Actuator
Total Travel – 4.00” ±0.15”
Performance Data
No load Current Draw – 1.8 ±1.0 Amps max.
Full load Current Draw – 3.0 ±1.0 Amps