Clarke CA90 32T, Руководство по обслуживанию, Страница: 38 / 62

Scrub System 38 Service Manual – CA90 32T
• With the case removed, you can access the carbon brushes. NOTE: Pay attention to the way the carbon
brush wires are folded up. The photos in this section had the wires moved to show the detail of the brush
and spring.
• Lift the spring tab to slide the brush out of the holder.
• Remove the screw that attaches the wire tab to the contact.
• Remove the carbon brush.
• Install new brushes in the reverse order. Insure the spring tab is seated properly on the carbon brush.
• Now gently fold the wires up toward the rotor end of the assembly.
• Re-install the case. NOTE: Be careful to keep your fingers clear. The magnets will “suck” the case from
your hands.