Clabo Gemma J G12, Техническая книга

Страница: 22 / 43

Gemma J Ice Cream Cabinet
English
pag. 22
FLASHING Programming phase
ON Measurement unit
FLASHING Programming phase
ON
Defrost enabled
FLASHING
Drip time in progress
ON An alarm is occurring
ON
Continuous cycle is running
ON Energy saving enabled
4.16 MAX & MIN TEMPERATURE MEMORIZATION (OPT.
“C”)
How to see the Min temperature
1. Press and release the key.
2. The “Lo” message will be displayed followed by the minimun temperature recorded.
3. By pressing the key again or by wayting 5s the normal display will be restored.
How to see the Max temperature
1. Press and release the key.
2. The “Hi” message will be displayed followed by the maximum temperature recorded.
3. By pressing the key again or by wayting 5s the normal display will be restored..
How to reset the MAX and MIN temperature recorded
1. Hold press the SET key for more than 3s, while the max. or min temperature is displayed.
(rSt message will be displayed)
2.
To confirm the operation the “rSt” message starts blinking and the normal temperature will
be displayed.
4.17 H
OW TO SEE THE SETPOINT
(OPT.
“C”)
1. Push and immediately release the SET key: the display will show the Set point value.
2. Push and immediately release the SET key or wait for 5 seconds to display the probe value
again.
4.18 H
OW TO CHANGE THE SETPOINT
(OPT.
“C”)
1. Push the SET key for more than 2 seconds to change the Set point value;
2.
The value of the set point will be displayed and the “ °C” or “°F”
LED starts blinking;
3. To change the Set value push the or arrows within 10s.
4. To memorise the new set point value push the SET key again or wait 10s.