Clabo Gemma J G12, Техническая книга

Страница: 18 / 43

Gemma J Ice Cream Cabinet
English
pag. 18
4.6 V
IEW AND EDIT THE CLOCK
(RTC) (OPT.
“A”)
To display the clock, press the SET button when "rtC" appears
When you enter the menu, the display will show the first parameter (day).
Press
and to scroll through all the parameters of the folder rtC. Select the desired
parameter by pressing SET. Press and to change the value, and:
• Press the button
to save the change
• Wait for 15 seconds without doing anything
• Press the key
once to confirm the last displayed value and return to the previous screen
4.7 S
TART A
M
ANUAL
D
EFROSTING
C
YCLE
(
OPT
.”A”)
Keep pressed the key more than 5 sec. for starting the manual defrosting cycle: the LED
on display will be on. If temperature condition for starting defrost cycle does not exist,
the display will flash 3 times, indicating the failure of defrost cycle start.
4.8 S
TAND
-B
Y
F
UNCTION
(
OPT
.”A”)
Keep pressed the ESC button for entering on “Stand-By” Mode: the display will visualize
“
OFF
”.
When OFF is displayed and the machine enters the “Stand-by” mode all loads and regulation
are disabled. Keep pressed again the ESC button for 5 sec. in order to exit from “Stand-by”
Mode and return on normal functioning.
Note: During Stand-by Mode the condense electric pan is working.
4.9 L
OCAL
A
LARMS
(
OPT
.”A”)
Display Cause Output Status
E1
Thermostat Probe Failure
Output according to “ Ont ” e “ OFt ”parameters
E2
Evaporator Probe Failure
Evaporator Fans Regulation according to
parameter
P3
Auxiliary Probe Failure Unchanged
AH1
High Temperature Alarm Unchanged
AL1
Low Temperature Alarm Unchanged
EA
External Alarm Unchanged
Ad2
Time-out End for Derosting Cycle. Unchanged
4.10 C
ONTROL
B
OARD
–
K
EYBOARD
T640 (
OPTION
“B”)
Keyboard T640
(183x38 mm)