Clabo Gemma J G12, Техническая книга

Страница: 16 / 43

Gemma J Ice Cream Cabinet
English
pag. 16

For the same reason eventual air conditioning or heating vents of the shop have not to be
directed to the cabinet and interfere with inner ventilation.

Direct sun light shouldn’t hit the cabinet in any time. Sun radiation could damage the
displayed product.
WARNING:
In case of damage of the displayed product, this one cannot be used or sold: it must be
removed from the cabinet.
WARNING:
Do not store explosive substances such as aerosol cans with a flammable propellant in this
appliance.
4.2 S
TART
U
P
1.
Operate the central electrical equipment’s main switch.
2.
Operate the showcase’s main switch behind the back
protection board. Remove the fixing screws from the
back board, as shown in Picture 9 position B, and set
the main switch on the “1” position (picture 9 position
A) by activating the showcase’s electrical power
supply.
4.3 C
ONTROL
B
OARD
- EWP
LUS
974 RTC (OPTION
“A”)
To visualize or change the set point. In programming mode allows the selection of a
parameter or the confirm of a value.
This button is used for going through the parameter codes or for increasing their value.
If pressed continually for 5 sec. allows the start of a manual defrost cycle.
This button is used for going through the parameter codes or for decreasing their value.
If pressed and released this button allows the access to the above section menu and the
confirm of a value.
Keep pressed this button for 5 sec. to enter in Stand-by mode.
Fig.9
EWPlus 974 RTC
(74x32 mm)