Clabo Gemma J G12, Техническая книга

Страница: 20 / 43

Gemma J Ice Cream Cabinet
English
pag. 20
4.12 M
ANUAL
D
EFROSTING
C
YCLE
(
OPT
.
“B”)
4.13 S
TAND
-B
Y
F
UNCTION
(
OPT
.
“B”)
Pressing ON/OFF key, “ OFF” will be displayed.
When OFF is displayed the machine enters the “Stand-by” mode and all loads and regulation
are disabled. Press again ON/OFF button to exit the Stand-by mode.
Note: During Stand-by mode the light switch is active.
4.14 L
OCAL
A
LARMS
(
OPT
.
“B”)
Press and release the SET key: Setpoint temperature will be immediately visualized. Wait 15
second to come back to normal visualization.
Press and hold the
SET button for more than 3 seconds to change setpoint value: the led
starts to flash.
Modify the value using
and keys.
Memorize the new set value pressing again SET button. The value will flash. Wait at least 15
seconds to exit from setpoint programming mode.
Press and Hold Defrosting Button for more than 3 seconds: the label “dF1” will appear on
display; push SET button to start defrosting.
Display Cause State of Outputs
P1 Thermostat probe failure
Output according to “ Con “ and “ COF “
parameters
P2
Evaporator probe failure Unchanged
P3 Auxiliary probe failure Unchanged
HA
High temperature alarm Unchanged
LA Low temperature alarm Unchanged
EE Memory anomaly
EAL
Digital input alarm Unchanged
BAL Blockage alarm from digital input Regulation outputs deactivated
rtc
Clock alarm Unchanged
rtF Clock alarm failure / not present
Alarm output active, other outputs
unchanged.