Clabo Gemma J G12, Техническая книга

Страница: 17 / 43

Gemma J Ice Cream Cabinet
English
pag. 17
There are a series of luminous points on the display, the meaning of which you will find in the table below:
LED Modalità Funzione
ON
Compressor on
FLASHING
Delay, Protection or Blocked Activation
ON
Evaporator Fans on
ON Temperature Set up on °C
ON Temperature Set up on °F
ON
Defrosting Active
FLASHING
Manual/D.I. Defrosting Active
ON ALARM Signal
FLASHING FAST Level 2 Parameter Access
ON
AUX Output Active
4.4 A
CCESS TO
M
ACHINE
S
TATUS
M
ENU
(
OPT
.”A”)
Press and release the SET button to access to Machine Status Menu. If alarm condition does
not exist, the display will visualize the label “SEt”. Press the keys
or for going
through the other labels:

AL: alarm folder;

SEt: Set point temperature folder;

rtC: Clock Parameters:
o
dAy: day of the week (da 0-6, 0 is Sunday)
o
h: hour (0 to 23h)
o
ꞌ
: Minutes (0 to 59 minutes

Pb1: thermostat probe value folder;

Pb2: evaporator probe value folder.
4.5 M
ODIFY THE
S
ET
P
OINT
T
EMPERATURE
(
OPT
.”A”)
Press and release the SET button to access to Machine Status Menu. If alarm condition does
not exist, the display will visualize the label “SEt”. Press and release the SET button again
for entering the folder: the display will visualize the value. Use the keys
and within
15 sec. for changing the Set Point value. Press and release SET button to confirm and exit
from the label.