Camera Positioning
The physical default position of the camera is as the top of the image. The camera module position can be adjusted along
two axes. Set the camera to the desired position by performing the following steps :
For horizontal adjustment(pan), rotate the camera module in the base. Do not rotate more than 360°.
•
For vertical adjustment(tilt), loosen thumbscrews, position camera, then gently tighten thumbscrews to secure
Camera.
•
To obtain a horizontal horizon(for tilted ceilings or sidewall mounting), rotate the base of the lens as necessary to align
the picture shown on the monitor. Do not rotate more than 340°.
•
CAUTION!
The CCD image sensors are highly sensitive and require special care for proper performance and extended
lifetime. Do not expose them to direct sunlight or bright spotlights in operating and non-operating
conditions. Avoid lights in the field of view of the camera.
3
INSTALLATION
9/52
CISEYE
Indoor IP Dome Camera
Users Manual
